Facilities
CELESTE's activities are supported by a network of specialised laboratories hosted at IACTEC, the technological division of the Instituto de Astrofísica de Canarias. Each laboratory is equipped with dedicated instrumentation, testing infrastructure and support equipment covering the full value chain, from optical design and manufacturing to environmental qualification and space validation. Below is an overview of the main facilities and equipment available in each laboratory.
SPACE-Lab
SPACE-Lab provides a complete set of facilities for the design, integration, testing and space qualification of instrumentation for small satellites, from mechanical manufacturing and electronics assembly to full environmental and functional testing under ECSS standards.
Environmental Testing
- Thermal vacuum chamber (TVAC) for space-condition simulation (high vacuum and extreme temperatures)
- Climatic chamber with temperature/humidity control and solar simulator
- Vibration test system (electrodynamic shaker with slip table and head expander) for launch vibration testing
- Solar simulators for radiation testing and calibration of space systems
- Anechoic chamber for electromagnetic compatibility (EMC) testing
- Temperature monitors and PID controllers for thermal environmental testing
Contamination Control
- ISO-6 softwall and hardwall (dark-capable) cleanrooms for optical and electronic assembly
- ISO-5 laminar flow cabinet
- Vacuum oven for material degassing and coating curing
- Particle counter for contamination monitoring
- Ultrasonic cleaning equipment
Mechanical Workshop
- Robotic measuring arm for high-precision dimensional verification
- Water-jet cutting machine for high-precision mechanical parts
- Laser cutting and engraving machine
- 3D printers (resin and filament) for prototyping and part manufacturing
- Overhead crane for handling heavy loads within the laboratory
Electronics & PCB Assembly
- PCB milling, pick & place, reflow oven and screen-printing equipment for printed circuit fabrication and assembly
- Soldering and SMD rework stations
- High-end oscilloscopes and logic analysers
- Programmable power supplies, precision multimeters, waveform generators and electronic loads
- Lock-in amplifiers, data acquisition systems and data loggers for low-signal detection
- Spectrum analyser and EMI accessories
Optics & Optoelectronics
- Optical tables for precision alignment and assembly of optical systems
- UV / VIS / NIR / SWIR / TIR cameras for optical and electro-optical testing
- Autocollimator for optical system alignment
- NIR and UV–VIS spectrometers
- Optical power meters and photodetectors (silicon and InGaAs)
- Integrating sphere and calibration lamps (HgAr, halogen, krypton)
- Shack–Hartmann wavefront sensor with autocollimator
- Telescopes for optical testing and calibration
LIOM – Laboratory for Innovative Opto-Mechanics
LIOM occupies more than 200 m² of office and laboratory space at IACTEC, with access to additional high-bay, crane and clean-room facilities for the assembly and integration of large-scale demonstrators such as the SELF telescope. The laboratory is being progressively equipped to support the fabrication, coating and validation of ultra-light optomechanical structures.
Fabrication & Prototyping
- Kiln / furnace for glass shaping and forming
- 3D printer for rapid prototyping of optomechanical components
General Infrastructure
- Clean-room area for sensitive assembly and integration tasks
- Vibration-isolated optical tables and interferometric metrology systems
- High-voltage electronics support and specialised optomechanical tooling
- Parallel GPU computing infrastructure for large-scale numerical simulation and neural network training
- High-bay, crane and clean-room facilities for large demonstrator assembly (e.g. SELF telescope)
Advanced Optical Systems Lab (LAOS)
Hosted at the Optical Systems Assembly Centre (CSOA), LAOS provides a full production chain for high-precision optics: from grinding and polishing of optical surfaces to thin-film coating and high-accuracy metrology.
Machining & Shaping
- Saw: OTS 400 NC (OptoTech)
- Generator: MCG 500 CNC Compact (OptoTech)
- Polisher: IRP600 (Zeeko)
- Polisher: MCP 1501 CNC (OptoTech)
- Ion Beam Figuring System: IBF450 (Bühler)
Coatings
- Sputtering system, up to 0.5 m optics (Elettrorava S.p.A.)
- Evaporation system, up to 0.5 m optics (Elettrorava S.p.A.)
- Sputtering system for large optics (AGC Plasma)
Metrology
- 3D scanner: ATOS 5 (Gom)
- Interferometer: PhaseCam 6110 (4D Technology)
- Interferometer: Verifire HD (Zygo)
- Non-contact optical profiler: NanoCam HD (4D Technology)
- Contact profiler: Form Talysurf® PGI Optics (Taylor Hobson)
- MetroTower: dedicated optomechanical infrastructure for in-process optical measurements during polishing on the MCP 1501 CNC
- Optical tables, reference optics and optical/mechanical components for metrology set-ups
- Clean rooms
Adaptive Optics Lab (AOLab) & Quantum and Optical Communications Lab (FSOC)
The Adaptive Optics Lab and the Quantum & Optical Communications Lab share a common set of essential instrumentation, combining wavefront sensing and correction technologies with photon detection and free-space laser communication equipment.
Wavefront Sensing & Detection
- High-speed SWIR camera, 400 fps (1000/1600 nm) for wavefront sensing with microlens arrays
- High-speed visible camera, 400 fps (600/900 nm) for wavefront sensing with microlens arrays
- Standard-speed SWIR and visible cameras for PSF measurement and quadrant detection
- 4-quadrant detector (4QD)
- Avalanche photodiode (APD) detectors
- Single-photon detectors: SNSPD system (with cryostat, rack, time-tagger and computer), high- and low-noise single-photon detector units
Wavefront Correction
- Deformable mirror, 97 actuators, with dedicated controller
- Tip-tilt mirror system with controller
- Atmospheric turbulence simulator (phase plates)
Lasers & Optical Communications
- Modulable (OOK) lasers at 1550 nm, 850 nm and 630 nm for communication link testing
- Alignment laser / pointer
- Quantum random number generator for QKD applications
Test & Measurement
- High-speed oscilloscope, 16 GHz bandwidth
- Additional high-speed oscilloscopes and general-purpose test equipment
- FPGA-based electronics for control and signal processing
Optical Bench & Components
- Optical tables and mounting hardware for experimental set-ups
- Kits of lenses, beamsplitters, dichroics and polarisers
- Meade LX200 10" telescope with tripod
Simulation Software
- Ansys Mechanical for structural and mechanical analysis
- Ansys OpticStudio (Zemax) for optical design and analysis